How To Make Pegboard Hooks

Who doesn’t love the organized and clean workstation? But sometimes, lack of proper care, your workstation gets messy.

Besides, without proper storing, your tools and hardware tend to lose the lifespan earlier.
People cannot buy tools and hardware regularly. So what is the solution?

If you want to get your job done with pegboard hooks, you first have to learn how to make pegboard hooks.

The process of making pegboard hooks

There are some steps to make pegboard hooks. Let’s discuss the entire process step by step.
Step 1: Materials and Tools

To make the pegboard hooks first, you should get some stiff wire. Many people choose to use metal coat hangers from the dry cleaner.

However, the rebar tie wire performs the task great as well.
Besides, you should have a way to cut it, and a pair of pliers to bend it into shape.

If you own a pair of pliers with a cutting edge and you can get by with 1 pair, though at times, it makes things easier to be with 2 pairs.

If you go to make the sharp edges, you will also require a file or some sandpaper.

Step 2: Coat Hangers Vs. Tie Wire

When you prefer coat hangers, they are closer in size to real pegboard hooks. Most importantly, the actual pegboard hook comes with about 1/8″ diameter, while the coat hanger about 1/16″ and the tie wire is 1/32″ – 3/64″.

The heavier the item comes with that you are hanging, and the further the hook sticks out from the wall, the more force you need to be placing on your hook.

As the tie wire becomes lighter gauge and more flexible, it will easily fail before the coat hanger will.

Step 3: Get Your Wire Ready

If you are going to choose tie wire, just cut off a piece. Around 3 – 4 inches is a good place to begin the journey.

Step 4: Make the Bends to Create Your Hook

The mounting portion of the hook comes with only just 2 bends. The part you actually hang things on is limited only by your imagination.

If you get a factory hook, I will use that as a guide, so your DIY hooks fit the board the same way. Make sure yourself about making a few adjustments for the different thicknesses.

Step 5: Putting Your New Pegboard Hook to Good Use

If you decide to make a hook that gets into several holes, be sure you calculate the distance between the holes so that everything gets inline properly. Maybe, the standard in the U.S. is found with 1″.

Conclusion:

Getting everything properly in your home, proper management is a must issue. You cannot ignore this issue. Your pegboard hooks can store your stuff so smoothly that you will find solace to see it.

Trying this at your home, studying our article on how to make pegboard hooks is a big investment.

To learn more about the various types of pegboard in the market available, go to this site https://www.sportingclays.net/best-pegboard-hooks/.